FEA Services
  • Home
  • Services
  • Projects
    • Seismic Analysis of Overhead Gantry Crane
    • Assessment of Drag Chain Hanger
  • Finite Element Analysis
    • Units
    • Co-ordinate Systems
    • FEA Procedure
    • Defining Objectives
    • Stress Concentration
    • Geometry import / clean up
    • Meshing
    • Material Properties
    • Boundary Conditions
    • Solvers
    • Investigating FEA Results
    • Reporting
    • Stress Theories
    • Cantilever Beam Worked Example
    • Pressure Vessel Worked Example
    • Shaft in Torsion Worked Example
    • Buckling Worked Example
    • Bearing (Contact) Worked Example
  • Articles
  • FAQs
    • What is FEA?
    • How much does FEA cost?
    • Should I de-feature CAD geometry prior to FEA?
    • What information should I send to you for an FEA quotation?
  • CONTACT

Projects


Our analysis expertise has helped our clients achieve their requirements in many industry sectors. Some of the projects we have delivered are as follows;
​
  • Response Spectrum Analysis using ANSYS finite element analysis program for class 1 nuclear mechanical handling system. Client: Amec

  • Design Code Assessment for nuclear class 1 overhead travelling crane to BS2573, BS5950 and JSP467. ​Client: SCX Special Projects
​
  • Finite Element Analysis using ANSYS of Successor nuclear submarine main propulsion gearbox. Client: David Brown Gear Systems
​
  • ​​Harmonic analysis of turbine blades for vibration assessment. Client: Cummins​​
​
  • Gear tooth contact structural assessment using FEA and assessment to BS ISO 6336 for bespoke misaligned gear coupling on a wind turbine. Client: David Brown Gear Systems
​
  • Response Spectrum Analysis using ANSYS finite element analysis program for class 1 nuclear small bore pipework systems servicing the Pressurised Water Reactor on Trafalgar Class submarines. Calculations for pressure vessel supports to ASME III. Client: Rolls Royce Naval

  • Design Code Assessment of Sellafield B30 pond skiphandler grabs to B23573. Client: Butterley Engineering

  • Finite Element Analysis of Ford Transit rear axle housing and differential. Client: Dana
​
  • Finite Element Analysis using FEMAP / NASTRAN of Boeing 787 landing gear hydraulic actuators. Client: GE Aviation

  • Seismic calculations for motorised crane cable reel for handling nuclear waste to CMAA 70 standards. Client: Metool Products

  • Design Code Assessment of mechanical handling equipment for defueling tools on Trafalgar Class nuclear submarines for the FNF project. Assessment to B23573, BS5950 and JSP 467 . Client: Assystem Energy and Nuclear
​
  • ​Design Code Assessment to BS2573 for offshore drag chain hanger installation. Client: Metool Products

Picture
Picture
Picture
Picture
HOME
SERVICES
PROJECTS
FINITE ELEMENT ANALYSIS
​ARTICLES
​FAQs
​CONTACT

ENQUIRIES

Tel 0114 240 1422
email: value design consulting

© COPYRIGHT 2019 ALL RIGHTS RESERVED.
  • Home
  • Services
  • Projects
    • Seismic Analysis of Overhead Gantry Crane
    • Assessment of Drag Chain Hanger
  • Finite Element Analysis
    • Units
    • Co-ordinate Systems
    • FEA Procedure
    • Defining Objectives
    • Stress Concentration
    • Geometry import / clean up
    • Meshing
    • Material Properties
    • Boundary Conditions
    • Solvers
    • Investigating FEA Results
    • Reporting
    • Stress Theories
    • Cantilever Beam Worked Example
    • Pressure Vessel Worked Example
    • Shaft in Torsion Worked Example
    • Buckling Worked Example
    • Bearing (Contact) Worked Example
  • Articles
  • FAQs
    • What is FEA?
    • How much does FEA cost?
    • Should I de-feature CAD geometry prior to FEA?
    • What information should I send to you for an FEA quotation?
  • CONTACT